Author Topic: Mixing Kicks (Mixed By Marc Mozart)  (Read 570 times)

  • Thriller
  • Audio Engineer
  • ****
  • Posts: 54
  • Respect: 3
  • "Cuz' this is thrilla, thrilla night"
    • View Profile
Mixing Kicks (Mixed By Marc Mozart)
« on: April 07, 2015, 10:11:15 AM »
http://www.mixedbymarcmozart.com/2014/10/02/mixing-kicks-real-kick-drums-808-909-subkicks-mix/


"KICK TONES: Frequencies + TuningThink of the Kick Drum Sound consisting of 3 different frequency components!
1. the fundamental root note in the low end (45 – 75 Hz)
2. the pressure point (an octave higher, 90 – 150 Hz)and 3. harmonics and noise (anything above).


Think of them like an ensemble of tones and frequencies, like a string section that has a bass, celli, violas and violins.


To place the Kick perfectly in your mix, it helps to look at and treat those 3 distinct components separately.


Some producers use different samples for these components, and I often get them as separate tracks for my mix sessions.


But even if your tracks come with a single Kick, you can create a copy of your Kick track on another track. By cutting (HPF) everything below 150Hz you can exclusively treat the harmonics and noise-component (3.). Experiment with various treatments from Tape Simulation to Distortion, Compressing/Limiting, then add that channel to the original sound.


Just as an example for the separation of the 3 distinct frequency components: the screenshot below shows the fundamental removed with a HPF, pressure point (138 Hz) dipped by 5 dB, and a broad boost of the “noise” of + 5.1 dB at 2500 Hz"
Recording and Producing Music. . . 8)
Recording and Producing Music. . .???
Recording and Producing Music. . .:o

Re: Mixing Kicks (Mixed By Marc Mozart)
« Reply #1 on: April 22, 2015, 11:21:28 PM »
Read, listen and think on it.